Does the cross-country forklift have any requirements for the brake fluid function?

1. Outstanding low-temperature function: If the brake fluid of the off-road forklift has poor fluidity or even condenses at low temperature, causing the pipeline, pump and other related parts to be blocked, we will feel it when braking the off-road forklift The brake pedal was so hard that it could not be stepped on at all and the forklift could not be braked.

2. The boiling point of the cross-country forklift brake fluid should be high: in each working cycle of the cross-country forklift, the cross-country forklift will frequently repeat the travel and reverse actions. If the brake pads of the cross-country forklift are in braking conditions for too long , It will make the temperature of the brake system rise rapidly. If our brake fluid has a low boiling point and is easy to evaporate, then for some brake systems, the pipes inside the system will be filled with brake fluid steam, thus There will be resistance, resulting in failure of the off-road forklift brake. Therefore, our requirement for it is to use a brake fluid with a higher boiling point, and the transpiration is relatively low, so that the probability of the forklift's air lock will be greatly reduced.

3. The viscosity should be appropriate: If its viscosity is too large, the low-temperature flow performance will be much worse, and the braking function of the car will also be greatly reduced; if its viscosity is too small, it cannot be given at high temperatures. It provides reliable smoothness with some leakage.

4. The anti-corrosion performance of off-road forklift brake fluid is better: if the brake fluid with poor anti-corrosion performance is used for a long time, the metal pipes and components will be corroded, so we require that the brake fluid be added Appropriate amount of rust inhibitor.

5. Chemical stability is also very important: because the off-road forklift brake fluid is applied under high temperature for a long time, in order to prevent the oil from being affected by heat differentiation and heavy platform to increase the viscosity, and it cannot produce sludge deposits. Use brake fluid with good chemical stability!

6. It is required that the brake fluid has a small impact on the rubber: because there are many rubber sealing parts in the brake system of the off-road forklift, so in order not to damage the mechanical strength and elasticity of other related rubber sealing parts such as the brake cup, then this It is required that the brake fluid should not have too much influence on the rubber expansion rate, the smaller the better. Another thing to note: Do not soak the rubber cup and other related rubber parts in the brake fluid for too long, otherwise the strength, volume and quality of the related parts will have a serious impact.